Medical Angiography and Cardiac X-ray Equipment WD-CGO-2100

Medical Angiography and Cardiac X-ray Equipment WD-CGO-2100

Technical Specifications:

Flat Panel Detector
Model: Paxscan 4030CB
Type: a-Si / CsI, monoblock
Image Size: 397mm×298mm
Element matrix: 2048×1536
Pixel Size: 194μm
Gray Scale: 16bit
Speed of acquisition: 30 fps, 15 fps, 7.5 fps, 3.7 fps, 2 fps, 1 fps, rate programmable
DQE (0): >70%
Spatial Resolution: 2.58 lp/mm

High Frequency Generator
Model: IN-GE
Maximum Power: 100kW
Invert Frequency: 400kHz
Continuous Fluoroscopy: 0.5~20mA
Pulse Fluoroscopy: 5~60mA
Kv Range: 40~125kV
Ma Range: 10~1000mA
Exposure Time: 1ms~6.3s
mAs: 0.5mAs~1000mAs
Power Supply: 3-phase 380VAC

X-Ray Tube Assembly
VAREX: G-1582BI
Focal Spot: 0.3mm／1.0mm
Focal Spot Power: 18／112kW
Maximum Anode Storage: 1500kHU
Anode Rotation Speed: 10800rpm (Max)
Anode Angle: 10°
Cooling Model: Air cooling +Oil cooling

Monitor Hanger
Cross Rails Ceiling Suspended
Range of Movement: Horizontal 2000mm*2000mm (cross rails),
Articulated Arm: 1200 mm, Rotation ±120°, Elevating Distance 400mm

Collimator
Model: IN-CO
Vision Type: rectangular, circular
Mode of Adjustment: Electric / Manual / Automatic
Filtration: 0.1/0.2/0.3mm Cu filtration adjustable

C-Arm and Cathlab-table Systems 

C-Arm
Model: CB-4
Inner Diameter: 1326mm, External diameter: 1526mm
Motion control: Electric Motorized
Rotation movement: -100°~+110°, Speed: 15°/s

Sliding movement: -50°~+40°, Speed: 5°/s

SID: 840mm~1180mm, Speed: 100mm/s
L-Arm Rotation movement: -90°~+90°; Speed: 5°/s
DSA Rotation movement: -100°~+110°; Speed: 50°/s
3D-DSA: 200°, 5.5s
C-arm reset: Manual, Motorized
CPR position: The tabletop moves to foot end
Position programs: 99
Anti-collision: Capacitive Sensing + 3D simulation Forecast

Cath-table
Model: GC-2
Length of tabletop: 3189mm×680mm×45mm
Width of tabletop: 250mm, 440mm, 680mm (three stages)
Thickness of tabletop: 45mm;
Material of table-top: Carbon fiber composite board
Tabletop longitudinal movement: 1150mm; transverse movement: 320mm
Elevating distance of table-top: 790mm～1120mm
Table movement on floor rail: Longitudinal 790mm
Tableside control box: Control of Cath-table movement, C-Arm and L-Arm
movement, Collimator control, Image playback control, SID control
Weight capacity: 200kg
Real-time tracking stepping angiography and stepping DSA (optional):
Step distance: 230mm;
Step coverage: Longitudinal 1300mm (travel range more than 900mm)

Configuration List:

System Standard Hardware Configuration 

1. High Frequency Generator/ IN-GE 100kW* 1 SET
2. Flat Panel Detector/Paxscan 4030CB* 1 SET
3. X-ray Tube Assembly/G-1582BI* 1 SET
4. Oil Cooling Circulating System/HE581* 1 SET
5. Cathlab-table/GC-2* 1 SET
6. C-Arm/CB-4 * 1 SET

Imaging Workstation

1. PC Console* 1 SET

2. 19” Color LCD Monitor* 1 SET

3. 19” Monochrome Medical LCD* 1 SET

4. 55” Color LCD Monitor* 1 SET

5. Software Packages * 1 SET

6. Uninterruptible Power Source/C3K* 1 SET

7. High-voltage Cable 75Kv／25m* 1 SET

8. Collimator/IN-CO* 1 SET

9. Suspended Lead Protective Screen Pb0.5* 1 SET

10. Area Dosimeter/DAP meter* 1 SET

Accessory Bag * 1 SET

Intercom System
Oil Circulating Device Stents
Exposure Foot Switch
Headscarves Shelf
Monitor Hanger
Table side Lead Protection
Infusion support
Two arm supports
Hand support board
Plate tray support